VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen
About the item
- Fractional Filtration: To achieve a better water-filtration effect, fractional filtration is adopted on our 8 LB commercial grease interceptor, whose flow rate is about 4 GPM (15.14 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively.
- Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform.
- Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package.
- Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself.
- Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc.
VEVOR Commercial Grease Interceptor, 6 GPM Commercial Grease Trap, 8 LB Grease Interceptor, Stainless Steel Grease Trap w/Top & Side Inlet, Under Sink Grease Trap for Restaurant Factory Home Kitchen
About the item
- Fractional Filtration: Fractional filtration is adopted on our 8 LB commercial grease interceptor to achieve a better oil-water separation effect, whose flow rate is about 6 GPM (22.71 LPM). The interior space is divided into three different filter areas. Solid waste and grease will be filtered by the waste-collecting basket firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively.
- Thickened Sus Material: Made of heavy-duty stainless steel, our 8 LB commercial grease trap, measuring 11.8×9.8×9.8 inch (30x25x25 cm) in dimensions, features durability and sturdiness. The rust & corrosion-proof surface is easy to clean and hard to deform. The inside filter basket with dense mesh also adopts stainless steel, which can effectively stop the solid waste and grease in the first step.
- Reliable Sealing Effect: As a piece of rugged equipment for filtering the kitchen waste and separating oil & water, this commercial grease trap spotlights the excellent sealing effect. The lid fits perfectly into the oil separating tank. The water inlet and drain outlet are also firmly welded to the body of the grease interceptor, from the comfort of which the water pipes can be connected tightly. Besides, the PTFE tape is also included in the package.
- 2 Installation Methods: With 2 installation methods available, you can connect our commercial grease trap to your kitchen sink without difficulty. For one type, link the grease pipe to the higher side inlet hole and the water pipe to the lower outlet hole, then it will work properly. For the other, the grease pipe can also be put into the inlet hole on the lid. You can place this grease interceptor right below the drainage outlet of the sink or underground for space-saving concerns.
- Well Designed For Wide Use: Our commercial stainless interceptor calls attention to thoughtful details, such as a solid outlet valve with control, the smoothly cut inlet hole on the lid, a handle for lifting, the stainless steel filter basket with dense mesh, and a piece of practical PTFE tape. You can apply it to various places, including but not limited to restaurants, fast food chains, public canteens, home kitchens, etc.
BEAMNOVA 8lbs Commercial Grease Trap Stainless Steel Interceptor for Restaurant Side Inlet
About the item
- UPGRADED VERSION – Larger capacity. Comes with outlet pipe, user manual & all accessories needed. The welding process is improved for a smoother welding port. Threads are added at the connect hook. Corners are rounded to prevent scratches. The cover inner side is added with a rubber ring to make sure no leakage. Also, the faucet is sealed with the ring.
- OPERATING PRINCIPLE- Grease traps work on the basic principle that FOG’s (Fats, oils & grease) float on water and solid particles sink. As the inflow of wastewater from the sinks enters the grease trap, the fats, oils, and greases rise to the surface and are trapped between the baffle plates. The baffles on the outlet prevent FOG’s from flowing directly through the unit.
- PRACTICAL DESIGN – Overall dimensions: 14.17″ x 10.24″ x 9.45″(L*W*H) . Locking devices on both sides prevent side leakage of sewage. The faucet switch makes it easier to control the outlet of sewage. The lifting handle at the top allows easy transportation. Please carefully check the specifications of this product before purchasing to ensure that it complies with your local regulations.
- EASY TO INSTALL – BEAMNOVA Grease Traps are delivered fully assembled and couldn’t be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to the drain. We recommend solvent weld pipe is used for a secure fit. Also, make sure the trap is on the flat floor.
- HIGH-QUALITY MATERIAL & WORKING EFFICIENCY – Made of heavy-duty 1.2mm thickness 201 stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 13 Gallons Per Minute (G.P.M.)
IRONWALLS 9LBS 5GPM Commercial Grease Traps Interceptor, Side Inlet Stainless Steel Grease Interceptor, Under Sink Grease Trap Oil-Water Separator for Home Kitchen, Restaurant, Cafe, Factory
About the item
- 【Product Specification】Overall dimensions of IRONWALLS grease trap : 15″ x 9.8″ x 9.8″ ( L x W x H). Mesh Filter Basket: 6.69”x4.8”x4.72”. Wastewater Inlet Diameter: 1.77″. Water Outlet Diameter: 1.77″. Water Outlet Valve Diameter: 1.18”. Grease Outlet Valve Diameter: 0.98″.
- 【Large Capacity & High Efficiency】The capacity of this waste water interceptor is 9lbs and the flow rate can be up to 5 gallon per minute, which is suitable for commercial home kitchen, petroleum, chemical, oil field, shipbuilding, port and municipal engineering industries, catering industry, etc.
- 【Advanced 3 Steps Fractional Filtration Technology】Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow from the bottom of the tee filter pipe to the next section. Food particles and grease are kept in the device. The removable filter basket can easily remove the solid residual waste. The side outlet valve helps to take out any liquid for future clean up when needed.
- 【Upgraded Separation & Discharge Design】This upgraded version oil-water separator is designed with tee filter pipe, which highly improves the filtering effect. Oil floating on the surface, the water flows from the bottom of the pipe to the next section. Newly added water outlet valve near the bottom of the wastewater separator for drain out all of the filter water, easy for you to clean up the sediment, oil, or sludge inside the water tank.
- 【EASY TO INSTALL】 Connect the pipe of the sinks and dishwasher to the Grease Trap grease inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or dishwasher applications. Please note that this product is suitable for the treatment of oily water of mineral oil, animal oil, vegetable oil, mixed oil, and various emulsified oils with a high-efficient oil-water separation effect. Please clean up the water tank at least 2-3 times a month.
John Boos GT-8 Carbon Steel Grease Interceptor, 14.2" Long by 11.2" Tall by 10.5" Wide, 8 lbs Grease Capacity
| Surface Recommendation | Plastic |
| Brand | John Boos |
| Item Weight | 22 Pounds |
| Unit Count | 1.0 Count |
About the item
- This Grease trap has an 8 pound grease capacity and measures 14.2″ Long by 11.2″ Tall by 10.5″ Wide. It measures 2″ from top to pipe opening, 7.5″ from pipe opening to base
- Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating
- Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed.
- T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic
- This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute
Best Commercial Grease Traps (May 2022)
