When choosing a rotary evaporator, it is important to consider the type of rotary evaporator. There are three main types of rotary evaporators: open-top, closed-top, and drum-type.
Open-top rotary evaporators are the most common type and are the most popular because they are easy to use. They have a top that is open to the atmosphere, and the evaporator is placed over a boiling pot of water. This type of rotary evaporator is best for small-scale laboratories that do not need to produce large amounts of vapor.
Closed-top rotary evaporators are similar to open-top rotary evaporators, but the top of the evaporator is closed off. This type of rotary evaporator is best for laboratories that need to produce large amounts of vapor.
Drum-type rotary evaporators are the least common type of rotary evaporator and are best for laboratories that need to produce high-quality vapor. Drum-type rotary evaporators have a series of drums that rotate to produce vapor.
BVV 1.5 Gallon Cold Trap (2QT Tank) Dry Ice, Liquid Nitrogen-1/4" Flare
About the item
- (1) 1.5gl high strength Stainless steel outer container (made of solid 304 stainless made in USA)
- (1) 2q interior Slurry Container (made of solid 304 stainless made in USA)
- (2) 1/2″ thick clear polycarbonate lids
- (2) Industrial grade silicone gasket
- (1) 1/4″ HVAC Hose 5′
stonylab Rotary Evaporator Bump Trap 24/40 Outer Upper Joint, 24/40 Standard Taper Inner Lower Joint, 100 ml
| Material | Glass |
| Capacity | 100 Milliliters |
| Brand | Stonylab |
ADAMAS-BETA Glass Rotary Evaporator Bump Trap 24/40 Outer Upper Joint, 14/20 Standard Taper Inner Lower Joint, 100ml
About the item
- CAPACITY – 100ml, 1Pcs, rotary evaporator bump trap
- SPECIFICATION – Upper Joint: 24/40, Lower Joint: 14/20, ground glass joints
- PREMIUM MATERIAL – Made of borosilicate glass, smooth surface and corrosion resistance, heavy duty design, reusable
- HIGH TEMPERATURE RESISTANCE – Annealing temperature 560℃, softening temperature 820℃, expansion coefficient is only one third of ordinary glass
- PROMISE – If received damaged, please contact us immediately. ADAMAS-BETA will solve it until satisfied
Huanyu NDK200-1A Nitrogen Evaporator Sample Concentrator Scientific Pressure Blowing Instrument (Lab) (96-Gas-Needles)
About the item
- 1, The heater allows samples to be heated rapidly to the evaporation temperature, through the gas blow to the solution surface via needle at the same time, prompting rapid evaporation and concentration solution.
- 2, The gas chamber height can be adjusted, the length of standard gas needle is 80 mm.
- 3, Each blow needle can be controlled independently, can be blown, separate flow regulation, no waste of gas.
- 4, The entire system can be arranged in the ventilation cabinet when process concentration of toxic solvents,
- 5, Built in over-temperature protection device, automatic fault detection and alarm function.
Best Lab Rotary Evaporators (September 2022)
